plate_loc proof_type ptype Trendsetter_400/800_Proofing This state parameter is not normally modified with the 'set' command. The firmware uses this parameter for internal 'housekeeping'. This parameter holds the current proofing type (or proof size). This information is set when the carrier is loaded. 'proof mode c x' command can also set this parameter. integer
  • 1
    •
  • 1 to 8
    •      The following are the proof sizes: ptype = 1 (4Up proof 22X30) ptype = 2 (8Up proof 30X40) ptype = 3 (Mini 4Up proof 22X26) ptype = 4 (2Up proof 15X22) state
  • ../nvs/plate_loc_state_type.xmlNVS: plate_loc type
    •
  • ..\..\ShowAllErrors.htmFirmware 0 Error Index
  • ..\..\ShowAllCommands.htmFirmware 0 Command Index
  • ..\..\ShowAllNVS.htmFirmware 0 NVS Index
    •  Updated: Wed Jul 16 19:37:22 2008 PST